• Signature PLUS Upgrade for BP-1, BP-2, BP-2.5, BP-10.5 and CPC. The Signature PLUS Upgrade is a combination of our best options for the very finest performance possible. Includes set of 4 Iso-Cones,  1/4" thick machined aluminum faceplate, EP-2000 filter/suppressor, Rhodium plated IEC inlet, ERS cloth on chassis interior, Oyaide outlets, 6' L-9 power cord and customers choice for chassis wiring of our 12 AWG Oxygen Free Copper wire, 12 AWG Oxygen Free Copper Litz wire, 10 gauge solid 4N pure silver wire or 12AWG UP-OCC stranded copper wire- - $1,200 for 15A units (save up to $100 over a-la-carte pricing) or $1500 for 20A units (save up to $100 over a-la-carte pricing).
•  
• FIM First Impressions Music 880 AC outlets, 20A design made from high-purity copper alloy, with superb construction and FIM-proprietary energizing treatment - full bodied sound - $65/ea.
•  
• Oyaide SWO-XXX - 15A design, Gold and Palladium plated bronze, superb construction and sound - $85/ea. (SWO-DX and SWO-GX available on special order)
•  
• Oyaide R-1 - 20A design, Platinum and Palladium plated Beryllium copper, the best available-$125/ea.
•  
• Furutech FI-10 15A IEC inlet - Rhodium plated brass - $23 ea.
•  
• Furutech FI-09R 15A IEC inlet - Rhodium plated pure copper conductor - $70 ea.
•  
• Furutech FI-33R 20A IEC inlet - Rhodium plated pure copper conductor - $88 ea.
•  
• V-Cap Teflon Capacitors - The very finest Teflon capacitors used in the filtering network on each duplex - $599
•  
• Bybee Quantum Purifiers--increases resolution - $200 [set of 2]
•  
• EP-2000-- parallel high current surge suppression and line filtering (neutral sounding with no power insertion loss) available for our CPCs, PPC or any of our Balanced Power Isolators. - $300

  The EP-2000 system (a patented design, manufactured for BPT by our friends at Environmental Potentials Inc.) is designed to suppress power line induced voltage surges up to 10,000 volts, which is approximately three times greater than the industry recognized statistical average of such surges entering a facility. It operates upon the principle of selective filtering, time spreading and absorption of voltage waveform anomalies induced onto and riding on a line frequency sinusoidal power wave. At the instant a high voltage transient or surge appears on the line frequency wave, it is clamped at a level just above the peak value of the sinusoid. This clamping action creates an amount of energy determined by the difference in the clamping voltage and the peak voltage of the transient, the impedance of the clamping device within the EP-2000, and the time duration of the transient. A solid state component designed for fail-safe performance. Includes LED for instant visual confirmation that the EP2000 surge/filtration system is fully active. If the EP2000 module should ever fail or loose its full capability for surge suppression, it can easily be replaced.

          ·          Removes, absorbs and dissipates transient voltage surges and spikes, high frequency noise and ring waves

          ·          Frequency Attenuation: -20 dB/decade roll-off starting at 2.5kHz

          ·          MaxSurge current: 25kA per mode

          ·          Provides both common and transverse modes of protection

                     ·          Extends life of all equipment connected

•  
• HCF-30 - A 30-amp  high current filter and surge suppressor with extremely low power insertion loss. We chose this very high current device in order to prevent any possibility of dynamic compression when used in our balanced power isolators or Clean Power Center - $200  (not available for the PPC)
  While we believe that the AC mains panel remains the best location for surge protection, this is impractical for many audiophiles. The filter/surge protection built into the HFC-30 specs as follows:
  • Surge spike current - 58,500 surge amp
  • Pulse power (peak) - 30,000,000 surge watts
  • Energy dissipation (20 micro seconds) - 600 surge joules
  • Response time - 1 pico second
  • Filter Type: Quad Balanced Pi Filter
  • Frequency Response: 10 KHz to 250 MHz
  • Attenuation: 65 dB

•  

• Machined aluminum faceplate - this 1/4" thick machined, polished and coated panel that perfectly complements our Balanced Power Isolators or CPC $75 [black or silver]. (not available for the PPC)
    
• ERS Cloth - hi-tech declassified material that absorbs and deflects RFI/EMI into the Ghz region - $75.
•  
• Iso-Cones - Custom made 1" machined 316 stainless steel isolation cones with matching protective disc (to protect wood floors or shelving). These can be used as standalone cones for any piece of gear or as a direct screw in replacement footer for our balanced isolators or CPC (matching 1/4" threaded stud included). $75 for a set of four or $60 for a set of three.
•  
• 4N OFC Copper Litz wiring--unit is internally wired with our custom 12 AWG Oxygen Free Copper Litz stranded copper wiring for faster transient response, improved dynamics, better high frequency extension, uncolored midrange and tight bass. This wiring matches our L-10 power cord. - $25.
•  
• 4N Silver wiring (double annealed)--unit is internally wired with our custom high purity 10AWG solid silver wiring in a Teflon jacket for superb low level detailing and a warm, organic midrange that tube lovers enjoy. - $75
•  
• 6N UP-OCC Copper wiring--unit is wired with ultra pure single crystal 12 AWG stranded copper wire for excellent low level detailing, neutral tone and smooth sound. - $50
•  
• One or two 300VA LoNo* balanced isolation transformer/s is/are used to balance and isolate AC power for best low-noise performance with a current restriction of 2.5 amps. One transformer may be added to power a preamp and/or digital components. Due to its current limitation, this transformer usually connects to only one or two duplexes to retain the remainder for high-current component power sources. A second 300VA transformer may be added, providing the opportunity to electrically isolate digital and analog front-end equipment. A CPC outfitted with two transformers generally will have one duplex connected to one transformer, one or two outlets connected to the other and leave the remaining duplex outlets for high-current equipment only. Two 300VA transformers can also be wired in parallel for a 5A capability. - $250 each   (available for CPC only)                                       *"LoNo and NBT are trademarks of Plitron Manufacturing Inc."  
  

PPC--Pure Power Center Upgrades--(click here)

BPT Power Cord factory-installed upgrade option menu:

• Super-Shield, our new proprietary hand-applied shielding technique whose combination of carefully chosen and implemented materials makes for superior RFI/EMI rejection. Unique to the Super-Shield is the shielding of the plugs as well as the cabling. The lowered noise floor is a marvel to behold, with jaw-dropping effects on recordings for first-class performance. This can be applied to any of our cords for a quantum leap forward in performance - $100/6ft length, $15/add. foot
  
• Plug-Shield, our proprietary 3" long tubular shield slips over high-end AC and IEC plugs by Marinco, Wattgate, FIM, Furutech, Hubbell, etc... Designed to fix the weak point in most all high-end power cords - the unshielded plug. Shielded power cords have single or multi-layered shielding over the cable to protect from RFI/EMI but loose the effect when it comes to the unshielded plugs. BPT Plug Shields absorb and reflect RFI/EMI to lower the AC noise floor, improving soundstage depth and low-level detail on any shielded power cord - $25 per pair
  

Contact us now via e-mail at contact@b-p-t.com
or call us at 314.265.1095
Balanced Power Technologies  .  708 Wheatfield Ridge Court  .  Defiance, Mo 63341